Controllers for Teddington Air Curtain systems

Intuitive and user-friendly

Air Curtain systems must switch on when they are needed. That's why we offer customized control systems for individual requirements on site. The most important thing: installation and operation are intuitive and user-friendly.

  • Controllers specifically for Shop & Business or industrial applications
  • Can be integrated into the existing building management system (BMS)
  • Multi-master solutions – one control panel for several independently controlled Air Curtain units
  • Fully automatic solutions – once set, the system runs automatically all year round depending on the temperatures
Shop & Business, Design

Controllers for our Shop & Business and Design Air Curtains

Broad controller portfolio

Modern and fast-responding touchscreen for our TCX controller

Controllers for the basic functions of the Air Curtains (TSC 5 and TSC 3-E)

Integration into Modbus or BACnet networks via the TCX Ethernet module with control panel

Full functionality via Modbus RTU without control panel

Teddington air curtain Ethernet module

Ethernet module (TCX)

Functions of the Shop & Business controllers

  TCX TCX-E TCX Lite TSC 5 TSC 3-E
Heating medium Water heater Electric heater Water heater Water heater Electric heater
Air volume control 5-stage / stepless 3-stage / stepless 5-stage / stepless 5-stage / stepless 3-stage / stepless
Key lock X X
External release
Summer / winter function X
Manual / automatic function
Room thermostat X X
Room sensor X X X X
Potential-free operating and fault message *2 *1 *1
Integrated weekly timer X X X
After-Run function
Filter monitoring X X X X
Operating hours counter X X X X
Fault memory X X
Speed control from the BMS
Electrical discharge temperature control X X X X
Expandable with Ethernet module X X X
Multi-master function X X X
Menu languages 10 10 10 - -

*1 = potential-free operating message only
*2 = potential-free operating and fault message only for EC motors, 0 - 10 V signal for AC motors

The most important functions explained (click on the “+” to open the information):

The device is enabled by a BMS via external enable. The external release takes place via a potential-free contact.

It is easy to switch between summer and winter mode via the control unit.

In summer mode, all connected heating valves are closed. The air curtain then operates in ambient mode.

In winter mode, shut-off valves are opened and control valves resume normal operation. The discharged air is heated accordingly.

It is easy to switch between manual and automatic mode via the control unit.

In manual mode, the Air Curtain system runs independently of automatic signals (e.g. door contact).

In automatic mode, the Air Curtain system is switched on or off by external signals.

The Air Curtain system can be set to operate depending on the room temperature.

The control unit continuously emits a status message via potential-free signals. The operating or fault message can be processed by the BMS to monitor the Air Curtain system.

The Air Curtain system is switched on and off depending on stored switching times.

To avoid constantly switching the Air Curtain system on and off, a after-run time can be set to allow the unit to continue running for a short time after the door is closed.

For automatic mode, a speed for the fans in the Air Curtain system can be specified by the BMS. This is done via a 0-10 V signal (or 4-20 mA signal with TCX).

With the optional Ethernet module for the TCX control unit, all essential device functions can be controlled via the BMS. The Modbus and BACnet (TCP/IP) protocols are available for this purpose.

One control panel can be used for several independently operating Air Curtain systems. A lean solution for large entrance areas with several independent Air Curtains.

Teddington control system TSDM

TSDM 5 (400V)

Teddington control TCI

TCI-230 (230V)

Industrial

Controls for our industrial air curtains

Robust and durable

IP54 as standard for use even in damp environments

5 standard functional scopes (S, M, L, XL, XXL) for every requirement (see table for function overview)

Standard functions of the TSDM 5 and TCI-230 industrial controllers

  S M L XL XXL
Control cabinet with protection class IP54
Mounting brackets
Full motor protection
Manual / automatic function
Repair switch
Operating and fault signal *3
ext. Release reset X
Summer / winter changeover X X
Frost protection function X X
Fixed base load level X X X X
Adjustable base load level X X
After-run function automatic contact X
Integrated weekly timer X X X
Fault memory X X X
Speed control from the BMS X X X
Ethernet module (Modbus, BACnet) X X X X

*3 Indicator lights only

The most important functions explained (click on the “+” to open the information):

The device is enabled by a BMS via external enable. The external release takes place via a potential-free contact.

It is easy to switch between summer and winter mode via the control unit.

In summer mode, all connected heating valves are closed. The air curtain then operates in ambient mode.

In winter mode, shut-off valves are opened and control valves resume normal operation. The discharged air is heated accordingly.

It is easy to switch between manual and automatic mode via the control unit.

In manual mode, the Air Curtain system runs independently of automatic signals (e.g. door contact).

In automatic mode, the Air Curtain system is switched on or off by external signals.

The Air Curtain system can be set to operate depending on the room temperature.

The control unit continuously emits a status message via potential-free signals. The operating or fault message can be processed by the BMS to monitor the Air Curtain system.

The Air Curtain system is switched on and off depending on stored switching times.

To avoid constantly switching the Air Curtain system on and off, a after-run time can be set to allow the unit to continue running for a short time after the door is closed.

For automatic mode, a speed for the fans in the Air Curtain system can be specified by the BMS. This is done via a 0-10 V signal (or 4-20 mA signal with TCX).

With the optional Ethernet module for the TCX control unit, all essential device functions can be controlled via the BMS. The Modbus and BACnet (TCP/IP) protocols are available for this purpose.

One control panel can be used for several independently operating Air Curtain systems. A lean solution for large entrance areas with several independent Air Curtains.

Accessories

We offer a wide range of accessories for our Air Curtain systems

Mounting

We offer optional mounting solutions to suit the door and ceiling situation.

Sensors

Automatic control of the Air Curtain system can be realised with the aid of temperature sensors.

Valves

The hot water heat exchanger is controlled by automatic or manual valves suitable for our Air Curtain systems and control units.

Electrical accessories

An optional door contact controls the Air Curtain when it is needed.

Contact us

Get in touch with us!

Please fill out the contact form. Fields marked with * are mandatory.
We will get in touch with you as soon as possible.

Are you looking for instructions or technical data?
Your selection:
  • Air Discharge System: CONVERGO® pressure chamber nozzle system
  • Air Discharge Range:
  • Mounting position:
  • Area of application:
  • Shape:
  • Heating type:
  • Sound insulation:
  • Unit Length: Unit length made to measure
  • Fan technology: AC
Please enable JavaScript in your browser to complete this form.
Rückmeldung